PRESTIGE Exterior Paint and Primer in One, Garden Sage, Semi-Gloss, 1 Gallon

Description

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended for use on exterior surfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas should be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before the use of and intermix all containers for color uniformity. Apply as is with a top quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature should be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or “matte” finishes get their name from the lack of reflection from the painted surface. This is likely one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes frequently require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the remainder of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall’s appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are perfect for use in areas with high humidity. They’re also the perfect to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall.

Make sure this fits by entering your model number.
Ultra premium paint and primer in one
High hiding formula for excellent coverage with smooth application
100% Acrylic latex paint for easy soap and water clean-up
Durable and washable with premium mildew resistant coating
Low VOC: less than 50 gms/L 0.42 lbs/gal.
Ultra premium paint and primer in one
High hiding formula for excellent coverage with smooth application
100% Acrylic latex paint for easy soap and water clean-up
Actual paint colors may vary from on-screen and printer representation
Low VOC: Less than 5 g/l prior to tinting