MARMORINO COCOPIESTO 4 Gal

Description

COCOPIESTO: The earthenware is a powdered Marmorino composed of earthenware from 0 to 1 mm, hydraulic lime, white, inert, and selected additives required for good workability of the product. Marmorino Cocopiesto is a great product for walls and ceilings because of its elasticity and low shrinkage. USE: Thanks to its breathability and good mechanical strength. Marmorino Cocopiesto is mainly used on buildings of historical and architectural importance. Ensure that the foundation plaster is thoroughly dry. Avoid application in excessively hot or windy conditions. For areas that are particularly absorbent and friable, it’s essential to apply a good substrate first – our Fixafond 400. It is strongly recommended to give protection to Marmorino Cocopiesto from frost in the winter and not use antifreeze additives. You may additionally wish to cover walls with sheets that are exposed to strong wind or rain, so as not to smudge the plaster just applied. Marmorino Cocopiesto is prepared by adding water and mixing by hand or with a mixer to obtain a homogeneous mixture. It is advised that product is prepaed as it is needed. Apply a generous amount of Marmorino Cocopiesto with our stainless steel trowel for first and second layers. Once the first layer is dry, a second coat of Marmorino Cocopiesto is applied, taking care to work immediately afterward. It is strongly recommended that work is done from start to finish, with no interruption, to make sure that the finish is uniform. Subsequently it is strongly recommended that you order a sufficient amount of material to complete your job at one time. Seal with one of our top coats. Appearance: White powder with colored grains of marble.