Liquid Ready Laser Marking Powder-“Brilliance Laser Inks” -BLI101MBLIQ120- Black Laser Ink for Metals Marking with CO2/Fiber/YAG (120 ml, Black)

Description

• HIGH QUALITY BLACK MARK-BLI101MBLIQ120 is a general purpose laser marking black ink to create top quality permanent black mark on variety of different metals.
• This is an exceptionally adaptable product and is recommended for almost any metal.
• Dries Quickly.
• Best results if marked shortly after application when dry.
• Extremely easy to wash off after laser marking.
• Please inquire/search (Laser Metal Spray CO2″ if Spray Cans ink is required.
• Apply quick and easy just like a paint can, no special training required.
• Coverage (25%more than Competition)

DIRECTIONS: Use a clean marking surface, free of oil and grease. Add denatured alcohol as directed. Gently stir the mixture even as adding. SHAKE WELL, apply on surface and mark with laser. Remove excess with water and wipe clean. ADD ALCOHOL, FILL UP TO THE INDICATED LINE AND STIR WELL, APPLY WITH THE BRUSH INCLUDED OR PURCHASE A PREVAL PROPELLANT TO CONVERT INTO A SPRAY SYSTEM ( PREVAL SYSTEM IS AVAILABLE INTERNATIONALLY SOLD SEPARATELY)

Make sure this fits by entering your model number.
✅ 100% SATISFACTION GUARANTEE OR MONEY BACK: Settings and marking techniques may vary depending on the laser and metal product being marked. We will be able to on a regular basis unravel most marking issues with simple setting adjustments. Please feel free to contact us directly.
✅ FOAM BRUSH INCLUDED: Pre-Measured quantity in the container for convenience. Ready to just add denatured alcohol or similar up the first arrow mark. Mix/Shake well, Use foam brush to apply on the substrate surface, apply a thin coat the usage of left to right motion, so long as you do not see through the surface.Use the suggested laser settings in our FAQ section as a starting guide line or feel free call our Technical Beef up Team.
✅ PREVAL READY BOTTLE: Pre-Measured quantity in the container for convenience. Ready to just add denatured alcohol or similar up the second arrow mark. Mix/Shake well. Install Preval Aerosol as per the manufactures directions and use it just like an Aerosol Spray.
✅ GENERAL GUIDELINES/SETTINGS: Scan QR CODE on product label to see our suggested laser settings in our FAQ section of our website. CO2 LASER – 25 Watt Minimum Required (100% P / 15-30% S / 500-700 DPI). FIBER LASER – 10 Watt Minimum Required (@ 10 Watt PWR / 50 mm/sec / 80-500 Q-Freq. / DPI- 0.1mm Hatch) Low watt Diode Lasers aren’t recommended.
✅ MULTI PACK DISCOUNT: Get more discount (SAVE with our bundle options, take a look at our listings with multi packs. Also available in Aerosol Spray Cans.