3 5/8″ Nail in Place Post Cap (for 4×4″ Wood Post) Box of 16

Description

Quick OverviewMake sure your post caps are protected! These black nail in place post caps are made from sturdy polypropylene and are made to fit 4″ wooden posts.Details

Make sure your post caps are protected! These black nail in place post caps are made from sturdy polypropylene and are made to fit 4″ wooden posts. Designed and manufactured by LMT.

Features:

Fits: 4″ Wood Posts
Total Height: 1.25″
Corner Radius: 0.031″
Extends 0.438″ Over The Profile
Maximum Profile Dimensions: 3.800″

All of our post caps are made to fit posts of their respective size. For example, a 3-5/8″ post cap will fit a 3-1/2″ post (outdoor diameter) Lumber 4×4’s are in fact 3.5×3.5″,

A 4″ post cap will only fit a 4″ post (outdoor diameter), and so on.

The hole is 1/8” or 0.125” so a 6D or 11 gauge nail 2 inches long will have to be fine.

A #4 screw will work but it may be hard to succeed in and install a screw on the top of a post.

Additional InformationSKULMT1621BColorBlackSize3 5/8″ (4″ Wood)StyleNail-InManufacturerLMT Mercer GroupConditionNew

Make sure this fits by entering your model number.
Use for 4″ Wood Posts (3 1/2″ x 3 1/2″ actual) Total Height: 1.25″
Offer protection to your investment! Current pressure treating steadily does not reach the center of the post. An exposed wood top allows rotting to begin faster than usual.
Take time to measure your post not all 4×4 post are the same dimension. These black fence post caps are for a standard 4X4 wood fence post (3.5″x3.5″) this cap measures 3 5/8″x 3 5/8.
The hole is 1/8” or 0.125” so a 6D or 11 gauge nail 2 inches long will have to be fine.
Made in USA Easily Nails or Screws on. Do not use glue like others recommend for their caps. It’s going to flex, crack, and break,