Brilliance Laser Inks 250 Grams Black Metal Marking Powder with Foam Brush | Permanent Durable High Contrast Laser Marking Ink for Fiber, YAG, and CO2 Laser Engraver

Description

• HIGH QUALITY BLACK MARK-BLI101MBPWD250 is a general purpose laser marking black ink to create top of the range permanent black mark on variety of different metals.
• This is an exceptionally adaptable product and is beneficial for almost any metal.
• Dries Quickly.
• Best results if marked shortly after application when dry.
• Extremely easy to wash off after laser marking.
• Please inquire/search (Laser Metal Spray CO2″ if Spray Cans ink is required.
• Apply quick and easy just like a paint can, no special training required.
• Coverage (25%more than Competition)

Make sure this fits by entering your model number.
✅ 100% SATISFACTION GUARANTEE OR MONEY BACK:Settings and marking techniques may vary depending on the laser and metal product being marked. We will be able to regularly unravel most marking issues with simple setting adjustments. Please feel free to contact us directly.
✅ FOAM BRUSH INCLUDED: Add denatured alcohol or similar RATIO 1:1. Mix/Shake well, Use foam brush to apply on the substrate surface, apply a thin coat the usage of left to right motion, so long as you don’t see through the surface.Use the suggested laser settings in our FAQ section as a starting guide line or feel free call our Technical Strengthen Team.
✅ AIR BRUSH or SPRAY-GUN APPLICATION: Add denatured alcohol or similar. RATIO 1:2 or 1:3. Mix/Shake well before spray.
✅ GENERAL GUIDELINES ✅ SETTINGS: Scan QR CODE on product label to see our suggested laser settings in our FAQ section of our website. CO2 LASER – 25 Watt Minimum Required (100% P / 15-30% S / 500-700 DPI). FIBER LASER – 10 Watt Minimum Required (@ 10 Watt PWR / 50 mm/sec / 80-500 Q-Freq. / DPI- 0.1mm Hatch) Low watt Diode Lasers aren’t beneficial.
✅ DRIES QUICKLY ✅ NO WAIT REQUIREMENT: To further speed up the process use hair dryer or heat gun to dry within seconds.